Brecht authored this commit, but he gave me the honours to actually
do it. Here it goes; Blender Internal. Bye bye, you did great!
* Point density, voxel data, ocean, environment map textures were removed,
as these only worked within BI rendering. Note that the ocean modifier
and the Cycles point density shader node continue to work.
* Dynamic paint using material shading was removed, as this only worked
with BI. If we ever wanted to support this again probably it should go
through the baking API.
* GPU shader export through the Python API was removed. This only worked
for the old BI GLSL shaders, which no longer exists. Doing something
similar for Eevee would be significantly more complicated because it
uses a lot of multiplass rendering and logic outside the shader, it's
probably impractical.
* Collada material import / export code is mostly gone, as it only worked
for BI materials. We need to add Cycles / Eevee material support at some
point.
* The mesh noise operator was removed since it only worked with BI
material texture slots. A displacement modifier can be used instead.
* The delete texture paint slot operator was removed since it only worked
for BI material texture slots. Could be added back with node support.
* Not all legacy viewport features are supported in the new viewport, but
their code was removed. If we need to bring anything back we can look at
older git revisions.
* There is some legacy viewport code that I could not remove yet, and some
that I probably missed.
* Shader node execution code was left mostly intact, even though it is not
used anywhere now. We may eventually use this to replace the texture
nodes with Cycles / Eevee shader nodes.
* The Cycles Bake panel now includes settings for baking multires normal
and displacement maps. The underlying code needs to be merged properly,
and we plan to add back support for multires AO baking and add support
to Cycles baking for features like vertex color, displacement, and other
missing baking features.
* This commit removes DNA and the Python API for BI material, lamp, world
and scene settings. This breaks a lot of addons.
* There is more DNA that can be removed or renamed, where Cycles or Eevee
are reusing some old BI properties but the names are not really correct
anymore.
* Texture slots for materials, lamps and world were removed. They remain
for brushes, particles and freestyle linestyles.
* 'BLENDER_RENDER' remains in the COMPAT_ENGINES of UI panels. Cycles and
other renderers use this to find all panels to show, minus a few panels
that they have their own replacement for.
ViewRender was removed, which means we can't get the render engine for files
saved in 2.8. We assume that any files saved in 2.8 were intended to use Eevee
and set the engine to that.
A fix included with this is that .blend thumbails now draw with Clay mode,
and never Eevee or Cycles. These were drawn with solid mode in 2.7, and should
be very fast and not e.g. load heavy image textures.
Differential Revision: https://developer.blender.org/D3156
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
Now that Eevee has support for offline rendering (F12) we can use it for
the Material previews.
Note: This makes the duplicated UI issue one panel worse. That happens when
Cycles if your scene engine, and Eevee is your workspace engine.
- Read-only access can often use EvaluationContext.object_mode
- Write access to go to WorkSpace.object_mode.
- Some TODO's remain (marked as "TODO/OBMODE")
- Add-ons will need updating
(context.active_object.mode -> context.workspace.object_mode)
- There will be small/medium issues that still need resolving
this does work on a basic level though.
See D3037
This adds the possibility to simulate things like red ears with strong backlight or material with high scattering distances.
To enable it you need to turn on the "Subsurface Translucency" option in the "Options" tab of the Material Panel (and of course to have "regular" SSS enabled in both render settings and material options).
Since the effect is adding another overhead I prefer to make it optional. But this is open to discussion.
Be aware that the effect only works for direct lights (so no indirect/world lighting) that have shadowmaps, and is affected by the "softness" of the shadowmap and resolution.
Technical notes:
This is inspired by http://www.iryoku.com/translucency/ but goes a bit beyond that.
We do not use a sum of gaussian to apply in regards to the object thickness but we precompute a 1D kernel texture.
This texture stores the light transmited to a point at the back of an infinite slab of material of variying thickness.
We make the assumption that the slab is perpendicular to the light so that no fresnel or diffusion term is taken into account.
The light is considered constant.
If the setup is similar to the one assume during the profile baking, the realtime render matches cycles reference.
Due to these assumptions the computed transmitted light is in most cases too bright for curvy objects.
Finally we jitter the shadow map sample per pixel so we can simulate dispersion inside the medium.
Radius of the dispersion is in world space and derived by from the "soft" shadowmap parameter.
Idea for this come from this presentation http://www.iryoku.com/stare-into-the-future (slide 164).
How to use:
- Enable subsurface scattering in the render options.
- Add Subsurface BSDF to your shader.
- Check "Screen Space Subsurface Scattering" in the material panel options.
This initial implementation has a few limitations:
- only supports gaussian SSS.
- Does not support principled shader.
- The radius parameters is baked down to a number of samples and then put into an UBO. This means the radius input socket cannot be used. You need to tweak the default vector directly.
- The "texture blur" is considered as always set to 1
Engine is not stored in WorkSpaces. That defines the "context" engine, which
is used for the entire UI.
The engine used for the poll of nodes (add node menu, new nodes when "Use Nodes")
is obtained from context.
Introduce a ViewRender struct for viewport settings that are defined for
workspaces and scene. This struct will be populated with the hand-picked
settings that can be defined per workspace as per the 2.8 design.
* use_scene_settings
* properties editor: workshop + organize context path
Use Scene Settings
==================
For viewport drawing, Workspaces have an option to use the Scene render
settings (F12) instead of the viewport settings.
This way users can quickly preview the final render settings, engine and
View Layer. This will affect all the editors in that workspace, and it will be
clearly indicated in the top-bar.
Properties Editor: Add Workspace and organize context path
==========================================================
We now have the properties of:
Scene, Scene > Layer, Scene > World, Workspace
[Scene | Workspace] > Render Layer > Object
[Scene | Workspace] > Render Layer > Object > Data
(...)
Reviewers: Campbell Barton, Julian Eisel
Differential Revision: https://developer.blender.org/D2842
Theses Materials are rendered after the SSR pass.
The only difference with previous method is that they have a depth prepass (less overdraw) and are not sorted.
For the moment the only way to enable this is to:
- enable Screen Space REFLECTIONS.
- enable Screen Space Refraction in the SSR parameters.
- enable Screen Space Refraction in the material tab.
This changes the Cycles exporting and Cycles/Eevee UI code to support both
output material nodes, giving priority to the renderer native one. Still
missing is Eevee code to prefer the Eevee output node.
Hashed Alpha transparency offers a noisy output but has the benefit of being correctly ordered. Noise can be attenuated with Multisampling / AntiAliasing.
This fixes an issue introduced by the new output node system, where "No
output node" was displayed in the material panel even when an output
node was present.
TexFace complicates the now more popular shading pipeline by having
per-face images, see: T51382 for details.
To keep the ability to select a per-material edit-image
(used with UV-mapping workflow), the material now stores an image
which will be set when changing images in edit-mode.
This is used as a bake-target when not using Cycles too.
- Use uniform color world for the world probe.
- Refactored the Fresnel expression to be better with Area Lights.
- Squared the roughness for default materials.
- Added New Batch cache routine to get the split mesh for each material. (optimization needed)
- Did some shader modifications to create default_frag and support a somwhat correct fresnel for lamps (to finish)
Although this wasn't so obvious since it
only showed up for factory settings and in the preferences window.
Panel display order depends on registration order,
Sorry for the noise. On the bright side we no longer need to move
classes around to re-arrange panels.
Also refactor:
- Material property UI related to shadows
- Preparation of OR-ed mode flags (ma->mode_l) of render materials
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D313
The "Cast Shadows" worked as expected, but it can cause problem in some cases.
For example, when using strand render, we need disabling only buffer shadows,
but the previous changes made that impossible. "Cast Shadows" should be added
as a newly created option.
This allows us to make materials that don't cast ray shadows.
Turning off this property can reduce the rendering time slightly.
Note: RNA path is changed to "use_cast_shadows" as well. The older
path "use_cast_buffer_shadows" still can be used as its alias, but
it will be removed after updating some addons.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D272
Notes:
* Did not touch to addons, that's up to the authors. ;)
* Did not removed any "name" field below lists. We might want to do this in some cases (less UI clutter), but probably not always, so will let maintainers of the related areas decide here.
Notes:
* Made those edits by full checking of py files, so I should have spoted most needed edits, yet it remains quite probable I missed a few ones, we'll fix if/when someone notice it...
* Also made some cleanup "on the road"!
