Currently only summed number of traversal steps and intersections used by the
camera ray intersection pass is implemented, but in the future we will support
more debug passes which would help checking what things makes the scene slow.
Example of such extra passes could be number of bounces, time spent on the
shader tree evaluation and so.
Implementation from the Cycles side is pretty much straightforward, could only
mention here that it's a build-time option disabled by default.
From the blender side it's implemented as a PASS_DEBUG with several subtypes
possible. This way we don't need to create an extra DNA pass type for each of
the debug passes, saving us a bits.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D813
This adds an AABB collision check for objects with volumes and if there's a
collision detected then the object will have SD_OBJECT_INTERSECTS_VOLUME flag.
This solves a speed regression introduced by the fix for T39823 by skipping
volume stack update in cases no volumes intersects the current SSS object.
Basically the title says it all, volume stack initialization now is aware that
camera might be inside of the volume. This gives quite noticeable render time
regressions in cases camera is in the volume (didn't measure them yet) because
this requires quite a few of ray-casting per camera ray in order to check which
objects we're inside. Not quite sure if this might be optimized.
But the good thing is that we can do quite a good job on detecting whether
camera is outside of any of the volumes and in this case there should be no
time penalty at all (apart from some extra checks during the sync state).
For now we're only doing rather simple AABB checks between the viewplane and
volume objects. This could give some false-positives, but this should be good
starting point.
Need to mention panoramic cameras here, for them it's only check for whether
there are volumes in the scene, which would lead to speed regressions even if
the camera is outside of the volumes. Would need to figure out proper check
for such cameras.
There are still quite a few of TODOs in the code, but the patch is good enough
to start playing around with it checking whether there are some obvious mistakes
somewhere.
Currently the feature is only available in the Experimental feature sey, need
to solve some of the TODOs and look into making things faster before considering
the feature is ready for the official feature set. This would still likely
happen in current release cycle.
Reviewers: brecht, juicyfruit, dingto
Differential Revision: https://developer.blender.org/D794
Basically the title says it all, we need to update volume stack when doing ray
scatter for SSS. This leads to speed regressions in cases scene does have both
volume and SSS (performance in case there's no SSS or no volume should be the
same).
We might try optimizing kernel_path_subsurface_update_volume_stack() a bit by
either recording all intersections or using some more appropriate visibility
flags.
Reviewers: brecht, juicyfruit, dingto
Differential Revision: https://developer.blender.org/D795
* __VOLUME__ is basic volume support with Emission and Absorption.
* __VOLUME_SCATTER__ enables volume Scattering support.
* __VOLUME_DECOUPLED__ enables Decoupled Ray Marching.
* CUDA can be compiled with Volume support again, change line 78 kernel_types.h for that.
Volumes are still fragile on GPU though, got some Memory/Address CUDA errors in tests.. needs to be investigated more deeply.
This gives you "Multiple Importance", "Distance" and "Equiangular" choices.
What multiple importance sampling does is make things more robust to certain
types of noise at the cost of a bit more noise in cases where the individual
strategies are always better.
So if you've got a pretty dense volume that's lit from far away then distance
sampling is usually more efficient. If you've got a light inside or near the
volume then equiangular sampling is better. If you have a combination of both,
then the multiple importance sampling will be better.
* Volume multiple importace sampling support to combine equiangular and distance
sampling, for both homogeneous and heterogeneous volumes.
* Branched path "Sample All Direct Lights" and "Sample All Indirect Lights" now
apply to volumes as well as surfaces.
Implementation note:
For simplicity this is all done with decoupled ray marching, the only case we do
not use decoupled is for distance only sampling with one light sample. The
homogeneous case should still compile on the GPU because it only requires fixed
size storage, but the heterogeneous case will be trickier to get working.
Transparent objects could become subtly visible by the different sampling
patterns for pixels covered and not covered by the object. It still converged
to the right solution but that can take a while. Now we try to use the same
sampling pattern here.
This fixes the SSS Direct/Indirect passes as well as the Combined pass.
Patch reviewed and with fixes and contributions from Brecht van Lommel.
Note: displacement/bump map (related to the report) will be handled separately
Reviewers: brecht
Differential Revision: https://developer.blender.org/D503
Expand Cycles to use the new baking API in Blender.
It works on the selected object, and the panel can be accessed in the Render panel (similar to where it is for the Blender Internal).
It bakes for the active texture of each material of the object. The active texture is currently defined as the active Image Texture node present in the material nodetree. If you don't want the baking to override an existent material, make sure the active Image Texture node is not connected to the nodetree. The active texture is also the texture shown in the viewport in the rendered mode.
Remember to save your images after the baking is complete.
Note: Bake currently only works in the CPU
Note: This is not supported by Cycles standalone because a lot of the work is done in Blender as part of the operator only, not the engine (Cycles).
Documentation:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Bake
Supported Passes:
-----------------
Data Passes
* Normal
* UV
* Diffuse/Glossy/Transmission/Subsurface/Emit Color
Light Passes
* AO
* Combined
* Shadow
* Diffuse/Glossy/Transmission/Subsurface/Emit Direct/Indirect
* Environment
Review: D421
Reviewed by: Campbell Barton, Brecht van Lommel, Sergey Sharybin, Thomas Dinge
Original design by Brecht van Lommel.
The entire commit history can be found on the branch: bake-cycles
Probably will not be noticed in most scenes. This helps reduce noise when you
have multiple lamps with MIS enabled, at the cost of some performance, but from
testing some scenes this seems better.
This was the original code to get things working on old GPUs, but now it is no
longer in use and various features in fact depend on this to work correctly to
the point that enabling this code is too buggy to be useful.
This can for example be useful if you want to manually terminate the path at
some point and use a color other than black.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D454
This now uses decoupled ray marching, and removes the probalistic scattering.
What this means is that each AA sample will be slower but contain less noise,
hopefully giving less render time to reach the same noise levels.
For those following along, there's still a bunch of volume sampling improvements
to do: all-light sampling, multiple importance sampling, transmittance threshold,
better indirect light handling, multiple scatter approximation.
Similar to surfaces, this will now always scatter rather than probabilistically
scattering or not depending on the transmittance.
This also makes calculation of branched path throughput non-probalistic, which
makes thing slower too. That's to be solved by decoupled ray marching later.
This adds a new option "Sample All Lights" to the Sampling panel in Cycles (Branched Path). When enabled, Cycles will sample all the lights in the scene for the indirect samples, instead of randomly picking one. This is already happening for direct samples, now you can optionally enable it for indirect.
Example file and renders:
Blend file: http://www.pasteall.org/blend/27411
Random: http://www.pasteall.org/pic/show.php?id=68033
All: http://www.pasteall.org/pic/show.php?id=68034
Sampling all lights is a bit slower, but there is less variance, so it should help in situations with many lights.
Patch by myself with some tweaks by Brecht.
Differential Revision: https://developer.blender.org/D391
Indirect and Direct samples can now be clamped individually. This way we can clamp the indirect samples (fireflies), while keeping the direct highlights.
Example render: http://www.pasteall.org/pic/show.php?id=66586
WARNING: This breaks backwards compatibility. If you had Clamping enabled in an old file, you must re-enable either Direct/Indirect clamping or both again.
Reviewed by: brecht
Differential Revision: https://developer.blender.org/D303
Z, Index, normal, UV and vector passes are only affected by surfaces with alpha
transparency equal to or higher than this threshold. With value 0.0 the first
surface hit will always write to these passes, regardless of transparency. With
higher values surfaces that are mostly transparent can be skipped until an opaque
surface is encountered.
