Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
The 'Add' menu in the node editor now has an option 'Search' at the top, which opens a separate popup for searching node types by name.
The operator for this is implemented completely in Python (this could also be done for the regular menu-based Add options in the future). There are a few necessary extensions to the RNA as well:
* The View2D struct in regions is now exposed. Currently only contains converter functions for coordinates from the region to the view (i.e. scrolled and zoomed view space). Used for converting mouse location to node space.
* The SpaceNode exposes the existing 'cursor_location' for operators to store mouse position beyond invoke calls. Not used for anything else (transforms) so far.
* The edit_tree in SpaceNode is also exposed, this is needed for operators to work correctly inside node groups.
whether getting of some property happens or this property is
being changed.
Also made it more clear whether affecting property belongs
to clip or mask datablock.
`````|````` | | | ..''''
| | | |______ .''
| | | | ..'
| | |_______ |___________ ....''
merge to TRUNK!
* The old compositor is still available (Debug Menu: 200)
This commit was brought to you by:
Developers:
* Monique Dewanchand
* Jeroen Bakker
* Dalai Felinto
* Lukas Tönne
Review:
* Brecht van Lommel
Testers:
* Nate Wiebe
* Wolfgang Faehnle
* Carlo Andreacchio
* Daniel Salazar
* Artur Mag
* Christian Krupa
* Francesco Siddi
* Dan McGrath
* Bassam Kurdali
But mostly by the community:
Gold:
Joshua Faulkner
Michael Tiemann
Francesco Paglia
Blender Guru
Blender Developers Fund
Silver:
Pablo Vazquez
Joel Heethaar
Amrein Olivier
Ilias Karasavvidis
Thomas Kumlehn
Sebastian Koenig
Hannu Hoffrén
Benjamin Dansie
Fred M'ule
Michel Vilain
Bradley Cathey
Gianmichele Mariani
Gottfried Hofmann
Bjørnar Frøyse
Valentijn Bruning
Paul Holmes
Clemens Rudolph
Juris Graphix
David Strebel
Ronan Zeegers
François Tarlier
Felipe Andres Esquivel Reed
Olaf Beckman
Jesus Alberto Olmos Linares
Kajimba
Maria Figueiredo
Alexandr Galperin
Francesco Siddi
Julio Iglesias Lopez
Kjartan Tysdal
Thomas Torfs
Film Works
Teruyuki Nakamura
Roger Luethi
Benoit Bolsee
Stefan Abrahamsen
Andreas Mattijat
Xavier Bouchoux
Blender 3D Graphics and Animation
Henk Vostermans
Daniel Blanco Delgado
BlenderDay/2011
Bradley Cathey
Matthieu Dupont de Dinechin
Gianmichele Mariani
Jérôme Scaillet
Bronze (Ivo Grigull, Dylan Urquidi, Philippe Derungs, Phil Beauchamp, Bruce Parrott, Mathieu Quiblier, Daniel Martinez, Leandro Inocencio, Lluc Romaní Brasó,
Jonathan Williamson, Michael Ehlen, Karlis Stigis, Dreamsteep, Martin Lindelöf, Filippo Saracino, Douwe van der Veen, Olli Äkräs, Bruno D'Arcangeli,
Francisco Sedrez Warmling, Watchmike.ca, peter lener, Matteo Novellino, Martin Kirsch, Austars Schnore, KC Elliott, Massimiliano Puliero, Karl Stein,
Wood Design Studios, Omer Khan, Jyrki Kanto, Michał Krupa, Lars Brubaker, Neil Richmond, Adam Kalisz, Robert Garlington, Ian Wilson, Carlo Andreacchio,
Jeremias Boos, Robert Holcomb, Gabriel Zöller, Robert Cude, Natibel de Leon, Nathan Turnage, Nicolas Vergnes, Philipp Kleinhenz, Norman Hartig, Louis Kreusel,
Christopher Taylor, Giovanni Remondini, Daniel Rentzsch, Nico Partipilo, Thomas Ventresco, Johannes Schwarz, Александр Коротеев, Brendon Harvey,
Marcelo G. Malheiros, Marius Giurgi, Richard Burns, Perttu Iso-Metsälä, Steve Bazin, Radoslav Borisov, Yoshiyuki Shida, Julien Guigner, Andrew Hunter,
Philipp Oeser, Daniel Thul, Thobias Johansson, Mauro Bonecchi, Georg Piorczynski, Sebastian Michailidis, L M Weedy, Gen X, Stefan Hinze, Nicolò Zubbini,
Erik Pusch, Rob Scott, Florian Koch, Charles Razack, Adrian Baker, Oliver Villar Diz, David Revoy, Julio Iglesias Lopez, Coen Spoor, Carlos Folch,
Joseph Christie, Victor Hernández García, David Mcsween, James Finnerty, Cory Kruckenberg, Giacomo Graziosi, Olivier Saraja, Lars Brubaker, Eric Hudson,
Johannes Schwarz, David Elguea, Marcus Schulderinsky, Karel De Bruijn, Lucas van Wijngaarden, Stefano Ciarrocchi, Mehmet Eribol, Thomas Berglund, Zuofei Song,
Dylan Urquidi )
* made bmesh_structure.h function names more consistant.
* remove unused code in bmesh_structure.c
* removed 'Edge Flip' operator (missing from bmesh but looked into trunk feature and dont think its worth keeping).
* tagged some BMESH_TODO's
=========================
Documentation: http://wiki.blender.org/index.php/User:Psy-Fi/UV_Tools
Major features include:
*16 bit image support in viewport
*Subsurf aware unwrapping
*Smart Stitch(snap/rotate islands, preview, middlepoint/endpoint stitching)
*Seams from islands tool (marks seams and sharp, depending on settings)
*Uv Sculpting(Grab/Pinch/Rotate)
All tools are complete apart from stitching that is considered stable but with an extra edge mode under development(will be in soc-2011-onion-uv-tools).
- use more logical names for strings, noticed too many strings called `str` when reviewing name patch.
- pass __func__ macro to uiBeginBlock(), quite a few names were wrong (copy/paste error).
The rendering device is now set in User Preferences > System, where you can
choose between OpenCL/CUDA and devices. Per scene you can then still choose
to use CPU or GPU rendering.
Load balancing still needs to be improved, now it just splits the entire
render in two, that will be done in a separate commit.
