This adds TAA to eevee. The only thing important to note is that we need to keep the unjittered depth buffer so that the other engines are composited correctly.
It has been deprecated since at least macOS 10.9 and fully removed in 10.12.
I am unsure if we should remove it only in 2.8. But you cannot build blender with it supported when using a modern xcode version anyway so I would tend towards just removing it also for 2.79 if that ever happens.
Reviewers: mont29, dfelinto, juicyfruit, brecht
Reviewed By: mont29, brecht
Subscribers: Blendify, brecht
Maniphest Tasks: T52807
Differential Revision: https://developer.blender.org/D2333
It's purpose is to limit the amount of light that spread across the screen.
Not entierly sure if it's very usefull, but it sure help to avoid to drown the screen in bloom.
This includes big improvement:
- The horizon search is decoupled from the BSDF evaluation. This means using multiple BSDF nodes have a much lower impact when enbaling AO.
- The horizon search is optimized by splitting the search into 4 corners searching similar directions to help which GPU cache coherence.
- The AO options are now uniforms and do not trigger shader recompilation (aka. freeze UI).
- Include a quality slider similar to the SSR one.
- Add a switch for disabling bounce light approximation.
- Fix problem with Bent Normals when occlusion get very dark.
- Add a denoise option to that takes the neighbors pixel values via glsl derivatives. This reduces noise but exhibit 2x2 blocky artifacts.
The downside : Separating the horizon search uses more memory (~3MB for each samples on HD viewport). We could lower the bit depth to 4bit per horizon but it produce noticeable banding (might be fixed with some dithering).
This patch adds "Pixel Size" to the performance options, which allows to render
in a smaller resolution, which is especially useful for displays with high DPI.
Reviewers: Severin, dingto, sergey, brecht
Reviewed By: brecht
Subscribers: Severin, venomgfx, eyecandy, brecht
Differential Revision: https://developer.blender.org/D1619
For the moment the only way to enable this is to:
- enable Screen Space REFLECTIONS.
- enable Screen Space Refraction in the SSR parameters.
- enable Screen Space Refraction in the material tab.
It now uses a quality slider instead of stride.
Lower quality takes larger strides between samples and use lower mips when tracing rough rays.
Now raytracing is done entierly in homogeneous coordinate space. This run much faster.
Should be fairly optimized. We are still Bandwidth bound.
Add a line-line intersection refine.
Add a ray jitter between the multiple ray per pixel to fill some undersampling in mirror reflections.
The tracing now stops if it goes behind an object. This needs some work to allow it to continue even if behind objects.
Output in 2 buffers Normals, Specular Color and roughness.
This way we can raytrace in a defered fashion and blend the exact contribution of the specular lobe on top of the opaque pass.
Up until now users had to switch to Blender Internal to set the dimension of their openGl renderings. This simple change adds the panel at the top of the scene render tab.
This add a new set of (possible) render settings that can be defined at
the scene level and overridable at the scene layer level.
Once we get workspaces we can either add workspace inbetween scene and
scene layer evaluation. Or to replace layer settings, to avoid extra
confusion to users.
An example of this setting is "samples", as implemented now for the clay
engine.
First this replace a custom data struct with IDProperty, and use
IDProperty group merge and copying functions. Which means that a collection
property setting is only created if necessary.
This implements the "Layer Collection settings" override system, as
suggested in the "Override Manifesto" document.
The core is working, with Scene, LayerCollection and Object using a
single IDProperty to store all the render settings data. Next step is to
migrate this to depsgraph.
Note: Clay engine "ssao_samples" was hardcoded to 32 for now. It will come
back as part of "Workspace Settings" later.
Many thanks for Bastien Montagne for the help with the UI template
nightmare ;)
Differential Revision: https://developer.blender.org/D2563
Although this wasn't so obvious since it
only showed up for factory settings and in the preferences window.
Panel display order depends on registration order,
Sorry for the noise. On the bright side we no longer need to move
classes around to re-arrange panels.
Initial work by Clément Foucault with contributions from Dalai Felinto
(mainly per-collection engine settings logic, and depsgraph iterator placeholder).
This makes Blender require OpenGL 3.3. Which means Intel graphic card
and OSX will break. Disable CLAY_ENGINE in CMake in those cases.
This is a prototype render engine intended to help the design of real
render engines. This is mainly an engine with enphasis in matcap and
ambient occlusion.
Implemented Features
--------------------
* Clay Render Engine, following the new API, to be used as reference for
future engines
* A more complete Matcap customization with more options
* Per-Collection render engine settings
* New Ground Truth AO - not enabled
Missing Features
----------------
* Finish object edit mode
- Fix shaders to use new matrix
- Fix artifacts when edge does off screen
- Fix depth issue
- Selection sillhouette
- Mesh wires
- Use mesh normals (for higher quality matcap)
- Non-Mesh objects drawing
- Widget drawing
- Performance issues
* Finish mesh edit mode
- Derived-Mesh-less edit mode API (mesh_rende.c)
* General edit mode
- Per-collection edit mode settings
* General engines
- Per-collection engine settings
(they are their, but they still need to be flushed by depsgraph, and
used by the drawing code)
This patch changes a couple of things in the video output encoding.
{F362527}
- Clearer separation between container and codec. No more "format", as this is
too ambiguous. As a result, codecs were removed from the container list.
- Added FFmpeg speed presets, so the user can choosen from the range "Very
slow" to "Ultra fast". By default no preset is used.
- Added Constant Rate Factor (CRF) mode, which allows changing the bit-rate
depending on the desired quality and the input. This generally produces the
best quality videos, at the expense of not knowing the exact bit-rate and
file size.
- Added optional maximum of non-B-frames between B-frames (`max_b_frames`).
- Presets were adjusted for these changes, and new presets added. One of the
new presets is [recommended](https://trac.ffmpeg.org/wiki/Encode/VFX#H.264)
for reviewing videos, as it allows players to scrub through it easily. Might
be nice in weeklies. This preset also requires control over the
`max_b_frames` setting.
GUI-only changes:
- Renamed "MPEG" in the output file format menu with "FFmpeg", as this is more
accurate. After all, FFmpeg is used when this option is chosen, which can
also output non-MPEG files.
- Certain parts of the GUI are disabled when not in use:
- bit rate options are not used when a constant rate factor is given.
- audio bitrate & volume are not used when no audio is exported.
Note that I did not touch `BKE_ffmpeg_preset_set()`. There are currently two
preset systems for FFmpeg (`BKE_ffmpeg_preset_set()` and the Python preset
system). Before we do more work on `BKE_ffmpeg_preset_set()`, I think it's a
good idea to determine whether we want to keep it at all.
After this patch has been accepted, I'd be happy to go through the code and
remove any then-obsolete bits, such as the handling of "XVID" as a container
format.
Reviewers: sergey, mont29, brecht
Subscribers: mpan3, Blendify, brecht, fsiddi
Tags: #bf_blender
Differential Revision: https://developer.blender.org/D2242
When using metadata stamping, it's often handy to have "Camera" in
front of the camera name, "Marker" in front of the marker text, etc.,
but sometimes those get in the way. This patch allows an artist to
turn those labels on/off.
Reviewed by: sergey, mont29, venomgfx
At the moment light shading in Blender is produced in viewspace. Apparently, that's why
shader nodes work with normals in camera space. But it is not convenient for artists.
The more convenient approach is implemented in Cycles where normals are represented in world space.
Blend4Web Team designed the engine keeping in mind shader parameters readability,
so normals are interpreted in world space as well. And now our users have to use some tweaks, like
empty node group with the name "Replace", which is replacing one input by another on the engine side
(replacing working configuration in Blender Viewport by the configuration that has the same behavior in the engine).
This patch adds the ability to switch to world space for normals and lamp vector in BI and Viewport.
This patch is very important to us and we crave to see this patch in Blender 2.7 because
it will significantly simplify Blend4Web material creation workflow.
{F315547}
{F315548}
Reviewers: campbellbarton, brecht
Reviewed By: brecht
Subscribers: homyachetser, Evgeny_Rodygin, AlexKowel, yurikovelenov
Differential Revision: https://developer.blender.org/D2046
This commit adds Peak Memory to the stamp options, the value is the same one that is already shown in the image viewer.
Requested by @nutel.
Reviewers: campbellbarton
Subscribers: campbellbarton, nutel
Differential Revision: https://developer.blender.org/D1989
Rationale - this panel also enables metadata that get written on files.
Also moved draw_stamp property in the panel - to make it clearer it only
controls the drawing, not individual metadata.
