Also set default CYCLES_INSTALL_PATH to CMAKE_INSTALL_PREFIX.
By default with a `make cycles` this will build to ${CMAKE_BINARY_DIR}/bin
Differential Revision: https://developer.blender.org/D9961
Change `"active_id"` to `"id"` so that tab completion in the asset browser
context returns the correct properties.
055ef5df61 renamed the `active_id` property
to `id`, but `dir(thecontext)` still returned `"active_id"`.
During viewport rendering the color values were clamped in order to
apply the overlay on top of it. This clamping would show the scene
colors washed out.
This patch adds a work around to skip the clamping when the overlays are
turned off.
Parial fix for {T77909}
The versioning code introduced in rB38df935c0985 skips the composite node
tree that is used by the scene thus not correctly versioning Set Alpha
nodes outside of node groups. This fix iterates through all node trees to
version all Set Alpha nodes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10110
Hans noticed that these dirty flags are only used for normals currently
and that the edge flag is not used at all. This patch still applies the
"entire" fix with all four flags.
Differential Revision: https://developer.blender.org/D10193
The issue was that boolean custom data layers were not written to files,
because the dna struct name `bool` does not exist. Adding a struct that
just contains a `bool/uint8_t` does not seem to be possible, it looks like
the minimum dna struct size is 4 bytes.
The proposed solution has two parts:
1. Write the custom data layer using `BLO_write_raw` instead of
`BLO_write_struct_array_by_name`.
2. When loading a file, reinitialize any custom data layer that was
not saved correctly (this is just a fix for existing files).
Differential Revision: https://developer.blender.org/D10194
Support recovering blend files with scripts enabled,
needed to fix T85011, can be useful in general too.
Adding this also resolves an assert in BKE_autoexec_match,
since it ran even when scripts were enabled.
- Return success from WM_recover_last_session
- Avoid setting global variables is already called in WM_file_read.
While it didn't cause any problems, these assignments ran even when
recovering the session failed to load the file.
- Return OPERATOR_CANCELLED when the operator fails.
Returning success is needed to fix T85011.
Texture paint tools were using DEFAULT cursor instead of PAINT_CROSS cursor as vertex paint, weight paint and sculpt modes.
Before
{F9591366}
After
{F9591370}
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D10172
I'm learning how driver functions work, and I found a couple of typos in the driver_functions.py template file. Here's a quick patch to fix them up.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D10149
Issue is visible here https://developer.blender.org/F8626313.
If there is enough space for both the item name and the library hint, display
both. Otherwise, clip either the item name, the library hint, or both so that
not more than 60% and 40% of the available width are used repectively.
There are further improvements we could do, as noted in T84188, this just fixes
the regression for the release.
Part of T84188. There were multiple reports about this, see merged in and
mentioned reports in T84188 and T78012.
wm.context_* operators typically have their options set by menus
or key bindings.
Re-using options in this case can cause problems where two
actions that change unrelated properties will re-use a setting
from the previous execution.
For example changing the lights Power impacted
changing it's Radius afterwards.
The RNA path used for animating the settings passed to the node tree
is incorrect. Currently it's just `settings.property_name`, but it's
the path from the ID, not the modifier, so it should be
`modifiers[modifier_name].settings.property_name`.
However, the "Settings" struct is separated in RNA and DNA, which means
that the callback to get the RNA path does not know about the modifier's
name in order to fill the above path, so some reference to the modifier
in the "Settings" struct would be necessary, which would create a
convoluted layout in the `ModifierData` struct.
Instead, this commit simply removes the "Settings" struct from RNA,
which isn't as elegant from the point of view of the Python API,
but otherwise it's a nice simplification. Note that we don't remove the
"Settings" struct from DNA, because it would break reading old files.
Differential Revision: https://developer.blender.org/D10175
In the CompositorOperation::deinitExecution the viewer could be freed at
the same time it was drawn in the image editor or node editor. There is
a guard for that but wasn't added during the migration of the two
editors to the draw manager.
Building RC builds would parse `BLENDER_VERSION_CYCLE_NUMBER` that
doesn't exist anymore. It was removed by {D7748}.
This change removes it from `buildbot_utils.py`.
The `image_get_gpu_texture` didn't use the iuser->view_index but
recalculated the requested view again. This lead to inconsistent
behavior when switching between multi view textures or stereo textures.
This has been fixed by ensuring that the `iuser->view_index` is always
used.
An Image has only place to store 2 view textures. This is done for
right/left eye compositing. A multi view texture can have more views.
This would lead to reading and writing to unallocated space.
When a multiview texture is requested that is larger than 1. It will
always be cached as being the first eye. The `gpu_view` of the Image is
also used as a cache key to check this.
During multiview rendering the `cryptomatte_accum_buffer` is not cleared
between the views and leaves artifacts on the next view to be rendered.
This change clears the accum buffer when it already exists and will be
reused for the next view.
Scene strips can't be prefetched and seq_prefetch_do_skip_frame()
should check if scene strip is in timeline. But it did not recurse into
meta strips, which resulted in crash.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9999
Generator strips with zero inputs have their length set to 1 pernamently.
In some cases it is useful to use speed effect on these strips because they
can be animated. This can be done by using their length as is on timeline as
content length.
This is very simplified and temporary solution, as cutting these strips won't
give expected results. Lot of code relies on length of these strips being fixed
to 1, resolving this properly should be done by T59540.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10026
Building proxy with meta strip selected resulted in attempt to render
meta strip itself and save result as image as is done when building
image proxies.
Remove meta strip from list of supported strips.
Multicam, Meta and scene strip are cleared from poll function in UI as well.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10001
Selecting inside an island no longer de-selects
when it's too far from an edge.
When edge select fails fall back to inside-face test.
This follows 908b383b7d
which made this change for face-select.
Apply to island selection since it doesn't make sense
for island select to behave differently.
* tbb::blocked_range moved to a different namespace and since the fix is
non-trivial, remove some unused code that used this.
* Task group priorities are no longer supported. It's unclear if they are
useful at all right now and even set correctly, for now all tasks are equal
priority with TBB 2021.
There are a couple of operations that are meant to set the active
modifier that currently don't. The first is a mouse press on the drag
icon on the right of the header, and the second is mouse presses on
modifier sub-panels headers.
This was an oversight in the implementation, especially the second,
because the blank space on the right of a sub-panel header often looks
just like the blank space elsewhere on the modifier's panel that
*does* set the active modifier.
Note that this purposefully doesn't include collapsing and expanding
the modifier as operations that set the active, since regardless of
whether that makes sense, it wasn't in the agreed upon design, which
would ideally not need changing for 2.92.
Differential Revision: https://developer.blender.org/D10155
Double floating point precision is an extension of OpenCL, which might
not be implemented by certain drivers, such as Intel Xe graphics.
Cycles does not use double floating point precision, and there is no
need on keeping doubles unless there is an explicit decision to use
them.
This is a simple fix from Cycles side to replace double floating point
type with a type of same size and alignment rules. Inspired by Brecht
and Patrick.
Tested on NVidia Titan V, Radeon RX Vega M, and TGL laptop.
Differential Revision: https://developer.blender.org/D10143
Was happening when there are deform modifiers prior to the multires.
There are detail in the comment around sculpt_undo_refine_subdiv(),
but briefly: the subdiv was refined with wrong base mesh coordinates.
Differential Revision: https://developer.blender.org/D10158
Previously float2 was converted to float3 by implicitly converting to a
float pointer first, which was then passed to the float3 constructor.
This leads to uninitialized memory in the z component of the new float3.
Thanks to that same point cache being exposed in **four** different RNA
paths (twice in particle system, and twice in its embedded cloth
simulation settings).
Only way is to also make particle system overridable.
Dividing the workload by number of tasks in float is imprecise and
lead in some cases to particles not being calculated at all
(example: 20000 particles, 144 tasks).
Switching this calculation to integer makes sure we don't lose count.
Differential Revision: https://developer.blender.org/D10157
While the previous fix for T84920 is correct, the crash could still be
triggered by changing the active object while in edit-mode.
Ensure stale data isn't used by tagging for depsgraph update when
edit-mode data is freed on undo.
While exiting edit-mode normally does this, it's possible to set the
active object to a non edit-mode mesh, skipping the mode-switch
operator and it's depsgraph tagging.
