The rotation direction was flipped recently.
This meant that rotation on a single axis gave negative results compared
with previous Blender releases.
This partially reverts a9b53daf23.
Differential Revision: https://developer.blender.org/D10299
Adds an exception so that the key-binding `control + Tab` does not get
duplicated as `command + Tab` on macOS because this is a global system
shortcut for the app switcher.
The key-binding `command + Tab` was shown for the operators “Toggle
Graph Editor“ and “Toggle Dope Sheet” in Dope Sheet and Graph Editor,
but only `control + Tab` actually worked.
Differential Revision: https://developer.blender.org/D10304
The driver variable `splines[0]` (on a curve)
behaved as if the path was `splines`.
Resolve pointers was well as properties as it's supported by the caller.
Error in original commit that added property support
82b0a9e369.
Dyntopo does not have Face Sets implemented yet, so the entire mesh is
considered a single Face Set. In that case, the check unique face set
function should always return true.
Reviewed By: JacquesLucke
Maniphest Tasks: T85230
Differential Revision: https://developer.blender.org/D10259
This ensured that the sculpt mode deformation is flushed to the mesh
datablock after leaving sculpt mode, so it can be duplicated and
extracted correctly.
Reviewed By: JacquesLucke
Maniphest Tasks: T85136
Differential Revision: https://developer.blender.org/D10254
A missing flush of the deformed PBVH coordinates to the shape key.
Reviewed By: JacquesLucke
Maniphest Tasks: T84370
Differential Revision: https://developer.blender.org/D10174
The edge preview data of the boundary needs to be freed with the
boundary data created for the brush. Also, all data for the
ScultpSession preview that is used to render the cursor needs to be
freed with the ##SculptSession##.
Found by Jacques Lucke
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10173
The white rotation Gizmo should always use the View orientation.
Before, if you set an orientation for the gizmo other than the default,
that gizmo would behave like the contraint Z Gizmo.
This is an old bug (strange not to have been reported before).
To define the direction of rotation, the View Vector is used.
However, only the projection matrix was being considered, but in
perspective mode, the position of the pivot also matters.
The 'ui_pan_to_scroll' uses 'WM_event_absolute_delta_y'. For scrolling the List View
we need to invert the direction to respect "natural scroll direction" system preferences.
Differential Revision: https://developer.blender.org/D10291
In everything in `EEVEE_renderpasses_postprocess` (or the corresponding
renderpass_postprocess_frag.glsl) colors get divided by a
'currentSample'.
This 'currentSample' is always incremented in
`EEVEE_temporal_sampling_draw` (and also one more time before we reach
`EEVEE_renderpasses_postprocess`.
This results in a "off-by-one", slightly inacurate colors and slight
inaccurate transparency (in certain passes like AOVs).
Now decrement the currentSample `EEVEE_renderpasses_postprocess` again
by one to compensate.
Maniphest Tasks: T85261
Differential Revision: https://developer.blender.org/D10286
Related to {D10286}. When volumetrics are used in the scene the coverage
is incorrect. The reason is that the current sample is 1 over the num
samples that are calculated.
This was caused by an incorrect bound check. Since we now use different
data type for indexed and non-indexed drawcalls, we need to check if the
next drawcall is going to overflow the buffer.
This patch fixes a bug introduced in
rB74188e65028d268af887ab2140e4253087410c1e.
The commit incorrectly moved the declaration and intialization of the
variable `pwr` inside the loop. Since the value was originally modified
in each iteration based on it's previous value and `pwHL` through
`pwr *= pwHL`, this change in scope was wrong. It resetted the value in
each iteration. This patch moves the declaration of `pwr` outside the
loop again.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10258
Includes improvements for the file IO. Namely, more meta data will be written from now on.
This change is required to prevent IO issues (e.g. T84649) that arised through the use of sparse grids caching (introduced in 2.92).
Due to an off-by-one error the generated studio light icons did not show
the influence of the 4th light. This fix changes the loop to iterate
over all of the lights when computing the lighting.
Differential Revision: https://developer.blender.org/D10283
Because the the vertex group name-to-index map is stored in the object
rather than object data, the object info node has to replace the
map when it replaces the mesh component on the geometry set with mesh
data from another object.
This normally works fine as a way to use the vertex groups from the
input mesh, but when passing this mesh to the next modifier, the entire
mesh component was replaced, removing the vertex group name map.
This commit adds a function to replace only the mesh data in mesh
component, uses it in the modifier code, and updates the relevant
comments.
Note that the fact that vertex group names are stored in object data
is a legacy design decision that should be reevaluated at some point.
Differential Revision: https://developer.blender.org/D10256
This resulted in hair drawing with an offset if an instance_offset was
set.
note: Usually the instance_offset gets combined with the objects obmat
in 'make_duplis_collection' / 'make_dupli', see
> /* Combine collection offset and `obmat`. */
Using the resulting DupliObject->mat instead does include the
instance_offset, but this results in double-transforms (something that I
have not investigated further), so now reconstruct the correct matrix
from scratch.
Maniphest Tasks: T85301
Differential Revision: https://developer.blender.org/D10285
This lead to wrong, stretched UVs regardless of the ON/OFF state of
"Correct Aspect" option (some code in the operator respected this
setting properly, whereas it was hardcoded in another part).
Before rB9296ba867462, `uvedit_pack_islands_multi` was always called
with `correct_aspect` = false for the UnwrapOptions.
After rB9296ba867462, `ED_uvedit_pack_islands_multi` was always called
with `correct_aspect` = true for the UVPackIsland_Params.
Both seem wrong [in that they do not take the operator setting into
account]. Now respect that setting [same as the following
`uv_map_clip_correct_multi` does as well btw.]
Now results match 2.90 [where this was still python] perfectly.
Maniphest Tasks: T85194
Differential Revision: https://developer.blender.org/D10246
Build sqlite without `tcl` support, as it's causes an error on
installation when `tcl` is installed into the systems `/usr/lib/` and
install isn't running as root.
This could be resolves by adding `tcl` as a dependency
however it's not needed for Python's sqlite integration.
Linux distributions (Debian & Arch at least) split this off
into a separate package (which Python doesn't depend on),
so there is no need for Blender to include sqlite's `tcl`
integration either.
Reviewed By: brecht, LazyDodo
Ref D10281
This was caused by the paint overlay drawing after the infront pass.
Moving the paint overlay before it fixes the issue. We might even do
that for more mode overlays.
Drawing on e.g. the X-Z plane was broken due to an earlier
commit (rBef28da262342). This was causing the projection when drawing
on an axis plane to fail.
The fix checks that the user is in view plane projection mode.
Reviewed By: antoniov
Maniphest Tasks: T85203
Differential Revision: https://developer.blender.org/D10252
This bug happens when media size doesn't match scene size and proxies
are enabled. This is because some strips are rendered in preview size
already - effects, mask or strips using proxies.
If strip input is prescaled it needs to be known when transforming
images, which does also scaling to preview size as one operation.
whether image needs prescaling is defined in function
`seq_need_scale_to_render_size()`
Problem was introduced in 5713626422. Previously all images were
scaled to fit into preview, and this was considered as baseline for
further image transformation.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D10183
Due a thread priority, the calculation of the current frame is not done before the frames are available. This produces wrong render frames.
The solution is verify the current frame before doing the real render. This adds only a few milliseconds, but it assures the frame is correct.
As the problem is only when render in background, the recalculation of the frame is only necessary when do real render and not a viewport render, so there is no impact in the animation FPS.
This solution replaces {rBf9e994d0f463}.
That commit created an inverted orientation matrix but the 'Align to
Transform Orientation' operator doesn't work well with inverted matrices.
This new solution makes the rotate operator use the negative vector of the
axis.
This reverts commit f9e994d0f4.
And fixes T85227.
That commit created an inverted orientation matrix but the 'Align to
Transform Orientation' operator doesn't work well with inverted matrices.
The previous fix to the width modes Percent and Absolute did
not take into account that with limit mode Weight, the amount
needs to be scaled by the bevel weight of the beveled edge in
question. (Sometimes there are two beveled edges in question,
in which case an average is used.)
This was caused by a use after free. The issue was that the motion steps
were successfully gathered but failling the last vertex count check,
discarding the copied VBOs but not removing the reference of the first
VBO which was passing the test.
When the displacement space is set to SHD_SPACE_WORLD, the GLSL method
"node_displacement_world" is used instead of the "node_displacement_object" method. The two GLSL methods:
```
void node_displacement_object(
float height, float midlevel, float scale, vec3 N, mat4 obmat, out vec3 result)
{
N = (vec4(N, 0.0) * obmat).xyz;
result = (height - midlevel) * scale * normalize(N);
result = (obmat * vec4(result, 0.0)).xyz;
}
void node_displacement_world(float height, float midlevel, float scale, vec3 N, out vec3 result)
{
result = (height - midlevel) * scale * normalize(N);
}
```
In contrast to the "node_displacement_object" method, the "node_displacement_world"
does not require an "obmat" parameter. Attempting to still pass "GPU_builtin(GPU_OBJECT_MATRIX)"
as additional parameter will result in a memory leak. The "GPUNodeLink" allocated in
the "GPU_builtin" method will never get released.
Fixes T83941 Memory leak when using the Displacement shader node in Eevee with the displacement
space set to "World Space"
This change removes copy-on-write operations from ID nodes which do not
need copy-on-write.
Should be no functional changes, as before the copy-on-write operation
would do nothing for those nodes anyway.
Building IDs which are not covered by copy-on-write process was not
implemented, which was causing parameters block not present, and, hence
causing crashes in areas which expected parameters to present.
First part of this change is related on making it so Copy-on-Write is
optional for ID nodes in the dependency graph.
Second part is related on using a generic builder for all ID types
which were not covered by Copy-on-Write before.
The final part is related on making it so build_id() is properly
handling ParticleSettings and Grease Pencil Data. Before they were not
covered there at all, and they need special handling because they do
have own build functions.
Not sure it worth trying to split those parts, as they are related to
each other and are not really possible to be tested standalone. Open
for a second opinion though.
Possible nut-tightening is to re-organize build_id() function so
that every branch does return and have an assert at the end, so that
missing ID type in the switch statement is easier to spot even when
using compilers which do not report missing switch cases.
As for question "why not use default" the answer is: to make it more
explicit and clear what is a decision when adding new ID types. We do
not want to quietly fall-back to a non-copy-on-write case for a newly
added ID types.
Differential Revision: https://developer.blender.org/D10075
Previously this relied on the dependency graph to detect changes in the screen
datablock, which would then notify the renderers. This was rather indirect an
not even really by design. Instead use notifiers to tag specific 3D viewports
to be updated.
Includes changes to BKE_scene_get_depsgraph to accept a const Scene pointer.
Testing if this works correctly requires adding back commits 81d444c and 088904d,
since those have been temporarily reverted.
Differential Revision: https://developer.blender.org/D10235
