This patch adds support for IES files, a file format that is commonly used to store the directional intensity distribution of light sources.
The new IES node is supposed to be plugged into the Strength input of the Emission node of the lamp.
Since people generating IES files do not really seem to care about the standard, the parser is flexible enough to accept all test files I have tried.
Some common weirdnesses are distributing values over multiple lines that should go into one line, using commas instead of spaces as delimiters and adding various useless stuff at the end of the file.
The user interface of the node is similar to the script node, the user can either select an internal Text or load a file.
Internally, IES files are handled similar to Image textures: They are stored in slots by the LightManager and each unique IES is assigned to one slot.
The local coordinate system of the lamp is used, so that the direction of the light can be changed. For UI reasons, it's usually best to add an area light,
rotate it and then change its type, since especially the point light does not immediately show its local coordinate system in the viewport.
Reviewers: #cycles, dingto, sergey, brecht
Reviewed By: #cycles, dingto, brecht
Subscribers: OgDEV, crazyrobinhood, secundar, cardboard, pisuke, intrah, swerner, micah_denn, harvester, gottfried, disnel, campbellbarton, duarteframos, Lapineige, brecht, juicyfruit, dingto, marek, rickyblender, bliblubli, lockal, sergey
Differential Revision: https://developer.blender.org/D1543
This save a little memory and copying in the kernel by storing only a 4x3
matrix instead of a 4x4 matrix. We already did this in a few places, and
those don't need to be special exceptions anymore now.
We now continue transparent paths after diffuse/glossy/transmission/volume
bounces are exceeded. This avoids unexpected boundaries in volumes with
transparent boundaries. It is also required for MIS to work correctly with
transparent surfaces, as we also continue through these in shadow rays.
The main visible changes is that volumes will now be lit by the background
even at volume bounces 0, same as surfaces.
Fixes T53914 and T54103.
Since all the shadow catchers are already assumed to be in the footage,
the shadows they cast on each other are already in the footage too. So
don't just let shadow catchers skip self, but all shadow catchers.
Another justification is that it should not matter if the shadow catcher
is modeled as one object or multiple separate objects, the resulting
render should be the same.
Differential Revision: https://developer.blender.org/D2763
The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
Before, Cycles would first sync the shader exactly as shown in the UI, then determine and sync the used attributes and later optimize the shader.
Therefore, even completely unconnected nodes would cause unneccessary attributes to be synced.
The reason for this is to avoid frequent resyncs when editing shaders interactively, but it can still be avoided for noninteractive renders - which is what this commit does.
Reviewed by: sergey
Differential Revision: https://developer.blender.org/D2285
Bump mapping was happening in world space while displacement happens in object
space, causing shading errors when displacement type was used with bump mapping.
To fix this the proper transforms are added to bump nodes. This is only done
for automatic bump mapping however, to avoid visual changes from other uses of
bump mapping. It would be nice to do this for all bump mapping to be consistent
but that will have to wait till we can break compatibility.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2191
Object coordinates can now be used in the displacement shader and will give
correct results, where as before bump mapping was calculated from the displace
positions and resulted in incorrect shading.
This works by evaluating the shader in two parts, first bump then surface, and
setting the shader state to match what it would be if the surface was
undisplaced for the bump shader evaluation. Currently only `P` is set as if
undisplaced, but other shader variables could be set as well, such as `I` or
`time`. Since these aren't set to anything meaningful for displacement I left
them out of this patch, we can decide what to do with them separately.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2156
Storing multiple copies of a shader was needed when the displacement method was
a mesh option and could be different for each mesh. Now that its a shader option
this is unnecessary.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2156
Unsigned int is not supported by OSL as far as i concerned, so should not
really matter here. However, might be wrong and perhaps more proper idea
would be so set it as regular int?
Mainly makes logging less verbose when doing progressive sampling in viewport.
Such kind of verbosity is not really possible to be filtered out with `grep`
so let's reshuffle few lines of code.
This is a mix of regression and old unsupported configuration.
Regression was caused by some checks added on Blender side which was
checking whether python function returned error or not. This made it
impossible to enable Cycles when running from a file path which can't
be encoded with MBCS codepage.
Non-regression issue was that it wasn't possible to use pre-compiled
CUDA kernels when running from a path with non-ascii multi-byte
characters.
This commit fixes regression and CUDA parts, but OSL still can't be
used from a non-ascii location because it uses non-widechar API to
work with file paths by the looks of it. Not sure we can solve this
just from our side by using some codepage trick (UTF-16?) since even
oslc fails to compile shader when there are non-ascii characters in
the path.
When World MIS is enabled by the user, we now check if we actually need it.
In case of a simple node setup (no procedurals, no HDRs..) we auto disable MIS internally to save render time.
This change is important for upcoming default changes.
Only happened when rendering second time with OSL enabled.
Was caused by fix for T47201. Hopefully now all the issues
are solved (meaning, we don't keep files opened and don't
crash either).
Now image will be opened for while render session is active, this is
needed to keep image cache working correctly. But stopping render
should now release all files descriptors.
Compiling OSL scripts with errors in them would cause Blender to crash since the OSL version
bump to 1.6.9 instead of printing the error to the console as it did before.
With version 1.6.2, OSL added a pointer to an OpenImageIO ErrorHandler as an argument to the
OSLCompiler constructor. However, since it defaults to the NULL pointer, Blender still compiled
fine after the OSL version bump.
It turns out, though, that this pointer is used without further checks inside the OSL code, which
makes it crash when it tries to report an error unless a valid ErrorHandler pointer is specified.
Therefore, this commit simply passes a pointer to the static default handler that OIIO offers,
which prints the error to the console just like OSL did before.
Using this feature for a more advanced error handling and displaying from the Blender side would
be possible and seems reasonable, but for now it's not really relevant for fixing this bug.
The issue was caused by OSL using TLS which is required to be freed before the
Cycles session is freed. This is quite tricky to do in Cycles because different
render session are sharing the same task scheduler, so when one session is being
freed TLS might need to be active still.
In order to solve this, we are now doing JIT optimization ahead of the time
which ensures either TLS of JIT is freed before the render on multi-core system
or freed on OSLRenderSession destroy on single-core system.
This might increase synchronization time due to JIT of unused function, but
that we can solve later with some smart idea,
The issue was caused by not really optimal graph traversal for gathering nodes
dependencies which could have exponential complexity with a long tree branches
connected with multiple connections between them.
Now we optimize the depth traversal and perform early output if the node was
already traversed.
Please note that this adds some limitations to the use of SVM compiler's
find_dependencies() in the cases when skip_node is not NULL and one wants to
perform dependencies find sequentially with the same set. This doesn't happen
in the code, but one should be aware of this.
The issue was than nodes dependencies were stored as set<ShaderNode*> which
is actually a so called "strict weak ordered", meaning order of nodes in
the set is strictly defined, but based on the ShaderNode pointer. This means
that between different render invokations order of original nodes could be
different due to different pointers allocated for ShaderNode.
This commit makes it so dependencies and maps used for ShaderNodes are based
on the node->id which has much more predictable order. It's still possible
to trick the system by doing some crazy edits during viewport rendfer and
cause difference between viewport and final render stacks.
Reviewers: brecht
Reviewed By: brecht
Subscribers: LazyDodo
Differential Revision: https://developer.blender.org/D1630
Basically we can not use sharp closure as a substitude when filter glossy is
used. This is because we can not blur sharp reflection/refraction.
This is quite quick and not really clean implementation. Not really happy
with manual handling of original settings, but this is as good as we can do
in the quick patch. It's a good acknowledgment and we now can re-consider
some aspects of graph simplification to make such cases more natively
supported.
P.S. This failure would have been shown by our regression tests, so please,
bother a bit to run Cycles's test sweep before doing such optimizations.
This inconsistency drove me totally crazy, it's really confusing
when it's inconsistent especially when you work on both Cycles and
Blender sides.
Shouldn;t cause merge PITA, it's whitespace changes only, Git should
be able to merge it nicely.
Issue was in fact only visible in certain circumstances:
- OSL was compiled with Boost Wave
- or system's cpp didn't handle space between -I and path
Now made it so both wave and cpp code paths are always happy.
Original patch from Shane Ambler with own modifications to
mimic what variable holds on more verbose.
