Generated and UV coordinates from the duplicator of instance instead of the
object itself.
This was used in e.g. Big Buck Bunny for texturing instanced feathers with
a UV map on the bird. Many files changed, mainly to do some refactoring to
get rid of G.rendering global in duplilist code.
The sampled color ramp data is passed to OSL as a color array. This has to be done as actual float[3] array though, since the Cycles float3 type actually contains 4 floats, leading to shifting color components in the array.
Additional parameter set functions for arrays have been added to the Cycles OSL interface for this purpose.
Regular rendering now works tiled, and supports save buffers to save memory
during render and cache render results.
Brick texture node by Thomas.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Brick_Texture
Image texture Blended Box Mapping.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Image_Texturehttp://mango.blender.org/production/blended_box/
Various bug fixes by Sergey and Campbell.
* Fix for reading freed memory in some node setups.
* Fix incorrect memory read when synchronizing mesh motion.
* Fix crash appearing when direct light usage is different on different layers.
* Fix for vector pass gives wrong result in some circumstances.
* Fix for wrong resolution used for rendering Render Layer node.
* Option to cancel rendering when doing initial synchronization.
* No more texture limit when using CPU render.
* Many fixes for new tiled rendering.
* Location: Basically the same as the location from Object Info node for object instances on particles, but in principle there could be additional offsets for dupli objects, so included for completeness.
* Size: Single float scale of the particle. Also directly translates to object scale for current dupli objects, but handy to have as a single float to start with instead of a scale vector (currently not even exposed in Object Info).
* Rotation: This is a quaternion, which are not yet supported by Cycles nodes. The float4 is copied to internal Cycles data and stored in the particles texture data, but the node doesn't have a socket for it yet and the data is not yet written to the stack. Code is just commented out so could be enabled quickly if/when rotation support is added to cycles.
* Velocity: Linear velocity vector of particles.
* Angular Velocity: Angular velocity around principle axes.
The texture data is currently packed tightly into the particles texture, which saves a few bytes, but requires an additional texture lookup for some vector attributes which spread over two float4s. Could also add another float4 to particle size to avoid this.
the implementation was following my early commit for Math node
I haven't had a chance to run those through Brecht, but would like to do eventually. (they work fine though)
- images that can't be loaded because of the limit are printed in the console.
- textures that can't be found show up as pink (so we know somethings wrong).
The particle data is stored in a separate texture if any of the dupli objects uses particle info nodes in shaders. To map dupli objects onto particles the store an additional particle_index value, which is different from the simple dupli object index (only visible particles, also works for particle dupli groups mode).
Some simple use cases on the code.blender.org blog:
http://code.blender.org/index.php/2012/05/particle-info-node/
* More fixes for r41599, removed clouds and distorted noise textures and ported the Noise texture to OSL.
ToDo: Color output is still commented, needs a closer look.
* Some more fixes (comments, uninitialized variables)
pass index, and a random number unique to the instance of the object.
This can be useful to give some variation to a single material assigned to
multiple instances, either manually controlled through the object index, based
on the object location, or randomized for each instance.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/More#Object_Info
Most of the changes are related to adding support for motion data throughout
the code. There's some code for actual camera/object motion blur raytracing
but it's unfinished (it badly slows down the raytracing kernel even when the
option is turned off), so that code it disabled still.
Motion vector export from Blender tries to avoid computing derived meshes
when the mesh does not have a deforming modifier, and it also won't store
motion vectors for every vertex if only the object or camera is moving.
=== BVH build time optimizations ===
* BVH building was multithreaded. Not all building is multithreaded, packing
and the initial bounding/splitting is still single threaded, but recursive
splitting is, which was the main bottleneck.
* Object splitting now uses binning rather than sorting of all elements, using
code from the Embree raytracer from Intel.
http://software.intel.com/en-us/articles/embree-photo-realistic-ray-tracing-kernels/
* Other small changes to avoid allocations, pack memory more tightly, avoid
some unnecessary operations, ...
These optimizations do not work yet when Spatial Splits are enabled, for that
more work is needed. There's also other optimizations still needed, in
particular for the case of many low poly objects, the packing step and node
memory allocation.
BVH raytracing time should remain about the same, but BVH build time should be
significantly reduced, test here show speedup of about 5x to 10x on a dual core
and 5x to 25x on an 8-core machine, depending on the scene.
=== Threads ===
Centralized task scheduler for multithreading, which is basically the
CPU device threading code wrapped into something reusable.
Basic idea is that there is a single TaskScheduler that keeps a pool of threads,
one for each core. Other places in the code can then create a TaskPool that they
can drop Tasks in to be executed by the scheduler, and wait for them to complete
or cancel them early.
=== Normal ====
Added a Normal output to the texture coordinate node. This currently
gives the object space normal, which is the same under object animation.
In the future this might become a "generated" normal so it's also stable for
deforming objects, but for now it's already useful for non-deforming objects.
=== Render Layers ===
Per render layer Samples control, leaving it to 0 will use the common scene
setting.
Environment pass will now render environment even if film is set to transparent.
Exclude Layers" added. Scene layers (all object that influence the render,
directly or indirectly) are shared between all render layers. However sometimes
it's useful to leave out some object influence for a particular render layer.
That's what this option allows you to do.
=== Filter Glossy ===
When using a value higher than 0.0, this will blur glossy reflections after
blurry bounces, to reduce noise at the cost of accuracy. 1.0 is a good
starting value to tweak.
Some light paths have a low probability of being found while contributing much
light to the pixel. As a result these light paths will be found in some pixels
and not in others, causing fireflies. An example of such a difficult path might
be a small light that is causing a small specular highlight on a sharp glossy
material, which we are seeing through a rough glossy material. With path tracing
it is difficult to find the specular highlight, but if we increase the roughness
on the material the highlight gets bigger and softer, and so easier to find.
Often this blurring will be hardly noticeable, because we are seeing it through
a blurry material anyway, but there are also cases where this will lead to a
loss of detail in lighting.
existing "Equirectangular". This projection is useful to create light probes
from a chrome ball placed in a real scene. It expects as input a photograph of
the chrome ball, cropped so the ball just fits inside the image boundaries.
Example setup with panorama camera and mixing two (poor quality) photographs
from different viewpoints to avoid stretching and hide the photographer:
http://www.pasteall.org/pic/28036
and 5 float image textures. For CPU render this limit will be lifted later
on with image cache support. Patch by Mike Farnsworth.
Also changed color space option in image/environment texture node, to show
options Color and Non-Color Data, instead of sRGB and Linear, this is more
descriptive, and it was not really correct to equate Non-Color Data with
Linear.
Contrast helps to adjust IBL (HDR images used for background lighting).
Note: In the UI we are caling it Bright instead of Brightness. This copy what Blender composite is doing.
Note2: the algorithm we are using produces pure black when contrast is 100. I'm not a fan of that, but it's a division by zero. I would like to look at other algorithms (what gimp does for example). But that would be only after 2.62.
This allows group nodes inside other group nodes in cycles and makes the
code more generic for all possible cases, like direct group
input-to-output links and unused group sockets.
Previous code tried to connect external nodes and internal group sockets
by following links until a "real" node input/output. This quickly
becomes complicated in corner cases as described above and can lead to
unexpected behavior when the group socket is of a different type than
the internal/external sockets, but that conversion is skipped.
The new code uses the concept of "proxy nodes" similar to what the new
compositor does. Each group socket is replaced with a proxy node with a
single input and output, to which other nodes in the same tree and
internal nodes can link to. After all groups have been expanded in the
graph, these proxy nodes are removed again, adding converter nodes if
necessary.
Node specially useful for Texture correction.
This is also a nice example of a simple node made from scratch in case someone wants to create their custom nodes.
Review by Brecht.
reviewed by Brecht, with help from Lukas.
Note: dot is reversed compared to Blender.
In Blender Normals point outside, while in Cycles they point inside.
If you use your own custom vector with the Normal Node you will see a difference.
If you feed it with object normals it should work just as good.
as with the HSV node the OSL code is relying on the (yet to be implemented) autorename.
Also the svm code could use mix (svm_lerp) instead:
32 . float3 color_inv = make_float3(1.0f, 1.0f, 1.0f) - color;
35 . . stack_store_float3(stack, out_color, svm_lerp(color_inv, color, factor));
I have a feeling that each node 'program' should have the least program as possible. I'll see with Brecht later.
But overall I don't know if that's any fast. And apart from that I think we will need this kind of function to move to a library if multiple functions linked in are not a problem.
----------------------------
reviewed and approved by Brecht
Important note:
the camera Z is reverted compared to Blender render.
Now it goes from zero (camera) to positive (in front of the camera)
.........................
note, the OSL code has a problem.
In the original node the input and output nodes have the same name (Color).
So this will be fixed here once Brecht come up with a nice autorenaming (or we do a doversion patch) for that.
using them, but rather do it now that I have the chance still. Highlights:
* Wood and Marble merged into a single Wave texture
* Clouds + Distorted Noise merged into new Noise node
* Blend renamed to Gradient
* Stucci removed, was mostly useful for old bump
* Noise removed, will come back later, didn't actually work yet
* Depth setting is now Detail socket, which accepts float values
* Scale socket instead of Size socket
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures
to reduce the amount of nodes needed to set up a simple texture.
These are currently editable in the texture properties tab, still need to make
them available in the node editor. Projection and color modification options will
be added later, they're not implemented yet but allocated already to avoid
version patches later.
Also an issue with the XYZ mapping is that when you set one to None, texture and
material draw mode doesn't draw the image texture well, OpenGL doesn't seem to
like the degenerate texture matrix?
decided it's better to render objects as either surface or volume.
This may break the volume rendering patch, but shaders with volume closures still
get tagged as having volume closures, so it should be fixable without too many
changes.
* Passes renamed to samples
* Camera lens radius renamed to aperature size/blades/rotation
* Glass and fresnel nodes input is now index of refraction
* Glossy and velvet fresnel socket removed
* Mix/add closure node renamed to mix/add shader node
* Blend weight node added for shader mixing weights
There is some version patching code for reading existing files, but it's not
perfect, so shaders may work a bit different.
* Fix missing update when editing objects with emission materials.
* Fix preview pass rendering set to 1 not showing full resolution.
* Fix CUDA runtime compiling failing due to missing cache directory.
* Use settings from first render layer for visibility and material override.
And a bunch of incomplete and still disabled code mostly related to closure
sampling.
