The `ANIM_apply_keyingset()` returns a value that indicates the number of
changed channels (if nonnegative) or an error state (negative). In the
places where the return value was actually used, this value was stored in
a badly named variable.
This fixes an issue where drivers using `object.dimension` only add a dependency on `GEOMETRY` to the depsgraph, whereas they should also depend on `TRANSFORM`.
This patch adds a new no-op operation that depends on the geometry and transform components to the Parameters component.
An alternative implementation would be to have `RNANodeQuery::construct_node_identifier` return multiple node identifiers. However, this would spread throughout the depsgraph code and unnecessarily force many other functions to either return or handle multiple nodes where in 99.999% of the time a single node would suffice.
The new `DIMENSIONS` node is added for each object. An upcoming patch will go over all no-op operation nodes and remove them from the depsgraph. Since this is a more dangerous operation, it'll be reviewed separately.
Differential Revision: https://developer.blender.org/D7031
Since the bounding boxes are now also being used for effector objects, there needs to be a better name for them. Instead of calling them EmissionMap, which caters only to emission objects, they will now be called FluidObjectBB.
- Keymap items now have 'repeat' boolean which can be set
to make keymap items respond to key repeat events or not.
- Support for X11 & WIN32 (not macOS currently).
This allows for the possibility to perform actions while a key is held
and finish the action upon release.
Thanks to @Severin for review and WIN32 support.
- Use 'int' for counters instead of short.
- Use 'bool' instead of a counter when only a change is being detected.
- Use typed enum for keying set flags.
- Include in comments when a negate error code may be returned.
- Split 'verify_fcurve' into two functions:
ED_action_fcurve_ensure which adds the f-curve if needed.
ED_action_fcurve_find which returns NULL when not found.
Callers of ED_action_fcurve_find had unused 'group'
argument which has been removed.
- Rename verify_adt_action to ED_id_action_ensure
It had an argument to add data which was always true,
remove this instead of splitting in into a separate function.
- Use 'BKE_object_defgroup' prefix for object functions.
- Rename 'defvert_verify_index' to 'defvert_ensure_index'
since this adds the group if it isn't found.
Use only one font icon in File Browser for all platforms. Correct mistake to allow this icon to be used.
Differential Revision: https://developer.blender.org/D7037
Reviewed by Brecht Van Lommel
Face Sets are the new system to control the visibility state of the mesh in sculpt and paint modes. They are designed to work in modes where brushes are the primary way of interaction and they provide much more control when working with meshes with complex shapes and overlapping surfaces.
This initial commit includes:
- Sculpt Face Sets data structures and PBVH rendering.
- Face Set overlay and opacity controls.
- Sculpt Undo support.
- Remesher reprojection support. The visibility state of the mesh is also preserved when remeshing.
- Automasking and Mesh filter support.
- Mask expand operator mode to expand Face Sets (Shift + W) and flood fill areas by connectivity (press Ctrl while expanding).
- Sculpt Mode Face Sets and Visibility API.
- Sculpt Face Sets creation and visibility management operators.
- Operator to randomize the Face Sets colors.
- Draw Face Sets brush tool to create and edit the Face Sets. Drawing on the mesh creates a new Face Set. Pressing Ctrl before drawing modifies the Face Set under the brush at the beginning of the stroke.
- Updated keymap and menu to work with Face Sets from Sculpt Mode (H to toggle visibility, Alt + H to show all, Shit + H to hide).
- Pie menu on the W key with Face common Sets operations.
Know limitations:
- Multires support. The Face Sets and Visibility API needs to be implemented for Multires.
Reviewed By: jbakker, #user_interface, Severin
Differential Revision: https://developer.blender.org/D6070
Adding more Windows special folder locations, used when browsing or bookmarking.
Differential Revision: https://developer.blender.org/D7014
Reviewed by Brecht Van Lommel
Nicer icons for File Browser System and Favorites lists on Mac.
Differential Revision: https://developer.blender.org/D6398
Reviewed by Brecht Van Lommel
Adds a minimal DirectX 11 Ghost context, plus some shared DirectX-OpenGL
resource interface using the NV_DX_interop2 WGL extension. From what I
know, this should be available on modern GPUs. If not, it should fail
gracefully.
There should be no user visible changes at this point.
Needed for DirectX-only OpenXR platforms (e.g. Windows Mixed Reality). I
heard there are other use-cases as well though.
It's known that this currently fails on some AMD systems, but that seems
to be fixable.
Most of this comes from the 2019 GSoC project, "Core Support of Virtual
Reality Headsets through OpenXR"
(https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Reviewed by: Jeroen Bakker, Ray Molenkam, Brecht van Lommel
Differential Revision: https://developer.blender.org/D6190
Since `std::deque` is used in a few areas of the Depsgraph, and an
upcoming patch adds one more, it's time it's considered as "commonly
used type".
No functional changes.
"session-wise" here mean while editing a same .blend file. So creating
or opening a new one will reset the uuid counter. This should avoid any
overflow in practice.
Only IDs added to Main database get an uuid, runtime-only ones are not
affected.
This is intended to provide undo with a way to find IDs across several
'memory realms' (undo speedup project).
No behavior change is expected from this commit itself.
Part of T60695.
Differential Revision: https://developer.blender.org/D7007
Enabling viewport denoising causes Cycles to use a multi-device, which always returned NULL when
asked for OSL memory and would subsequently crash. This fixes that by returning the correct OSL
memory pointer from the CPU device in the special viewport denoising multi-device.
Selecting certain child datablocks also selects the parent (e.g.
selecting a pose bone selects the armature). The base was selected, but
the outliner tree element was left unselected. The subsequent selection
sync would then deselect the parent base because it was not flagged as
selected in the outliner.
This led to issues like T74332 where selecting a pose bone in the
outliner did not show drivers in the driver editor unless the armature
was explicitly added to the selection afterwards.
The solution is to also flag the outliner elements as selected when
selecting parent bases.
Differential Revision: https://developer.blender.org/D7029
This feature takes some inspiration from
"RenderMan: An Advanced Path Tracing Architecture for Movie Rendering" and
"A Hierarchical Automatic Stopping Condition for Monte Carlo Global Illumination"
The basic principle is as follows:
While samples are being added to a pixel, the adaptive sampler writes half
of the samples to a separate buffer. This gives it two separate estimates
of the same pixel, and by comparing their difference it estimates convergence.
Once convergence drops below a given threshold, the pixel is considered done.
When a pixel has not converged yet and needs more samples than the minimum,
its immediate neighbors are also set to take more samples. This is done in order
to more reliably detect sharp features such as caustics. A 3x3 box filter that
is run periodically over the tile buffer is used for that purpose.
After a tile has finished rendering, the values of all passes are scaled as if
they were rendered with the full number of samples. This way, any code operating
on these buffers, for example the denoiser, does not need to be changed for
per-pixel sample counts.
Reviewed By: brecht, #cycles
Differential Revision: https://developer.blender.org/D4686
Introduce new IDTypeInfo structure.
Each ID type will have its own, with some minimal basic common info,
and ID management callbacks.
This patch only does it for Object type, for demo/testing purpose.
Moving all existing IDs is a goal of next "cleanup Friday".
Note that BKE_idcode features should then be merged back into BKE_idtype -
but this will have to be done later, once all ID types have been properly
converted to the new system.
Another later TODO might be to try and add callbacks for file read/write,
and lib_query ID usages looper.
This is part of T73719.
Thanks to @brecht for initial idea, and reviewing the patch.
Differential Revision: https://developer.blender.org/D6966
This was raised in T74017, the issue being that we point to `/dev`
version of the manual for the addons when we want to point to a specific
version instead.
Instead of manually updating the URL every release we can do this.
The `bl_info` for addons will need to be updated in the format of
`'doc_url':
{BLENDER_MANUAL_URL}/addons/import_export/scene_gltf2.html",`
Differential Revision: https://developer.blender.org/D6995
When running with debug enabled ('-d' argument),
warnings are printed for add-ons which are not yet updated.
Reminder to name things based on what they do,
not the technologies they use :)
