This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
Custom render passes are added in the Shader AOVs panel in the view layer
settings, with a name and data type. In shader nodes, an AOV Output node
is then used to output either a value or color to the pass.
Arbitrary names can be used for these passes, as long as they don't conflict
with built-in passes that are enabled. The AOV Output node can be used in both
material and world shader nodes.
Implemented by Lukas, with tweaks by Brecht.
Differential Revision: https://developer.blender.org/D4837
In a test file containing 1300 copies of the same shader, this reduces shader update time from 3.1 sec to 0.05 sec.
Thanks to @swerner for noticing this issue.
Reviewers: brecht, sergey, swerner
Subscribers: swerner
Differential Revision: https://developer.blender.org/D5376
It used to be used for some sort of ignoring automatically
generated bump nodes. But nowadays it causes one of the shaders
in Classroom demo file to be compiled wrong.
There is one legit place in the code where memcpy was used as an
optimization trick. Was needed for older version of GCC, but now
it should be re-evaluated and checked if it still helps to have
that trick.
In other places it's somewhat lazy programming to zero out all
object members. That is absolutely unsafe, at the moment when
less trivial class is used as a member in that object things
will break.
Other cases were using memcpy into an object which comes from
an external library. We don't control that object, and we can
not guarantee it will always be safe for such memory tricks
and debugging bugs caused by such low level access is far fun.
Ideally we need to use more proper C++, but needs to be done with
big care, including benchmarks of each change, For now do
annoying but simple cast to void*.
This patch adds support for IES files, a file format that is commonly used to store the directional intensity distribution of light sources.
The new IES node is supposed to be plugged into the Strength input of the Emission node of the lamp.
Since people generating IES files do not really seem to care about the standard, the parser is flexible enough to accept all test files I have tried.
Some common weirdnesses are distributing values over multiple lines that should go into one line, using commas instead of spaces as delimiters and adding various useless stuff at the end of the file.
The user interface of the node is similar to the script node, the user can either select an internal Text or load a file.
Internally, IES files are handled similar to Image textures: They are stored in slots by the LightManager and each unique IES is assigned to one slot.
The local coordinate system of the lamp is used, so that the direction of the light can be changed. For UI reasons, it's usually best to add an area light,
rotate it and then change its type, since especially the point light does not immediately show its local coordinate system in the viewport.
Reviewers: #cycles, dingto, sergey, brecht
Reviewed By: #cycles, dingto, brecht
Subscribers: OgDEV, crazyrobinhood, secundar, cardboard, pisuke, intrah, swerner, micah_denn, harvester, gottfried, disnel, campbellbarton, duarteframos, Lapineige, brecht, juicyfruit, dingto, marek, rickyblender, bliblubli, lockal, sergey
Differential Revision: https://developer.blender.org/D1543
* Remove tex_* and pixels_* functions, replace by mem_*.
* Add MEM_TEXTURE and MEM_PIXELS as memory types recognized by devices.
* No longer create device_memory and call mem_* directly, always go
through device_only_memory, device_vector and device_pixels.
The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
Before, Cycles would first sync the shader exactly as shown in the UI, then determine and sync the used attributes and later optimize the shader.
Therefore, even completely unconnected nodes would cause unneccessary attributes to be synced.
The reason for this is to avoid frequent resyncs when editing shaders interactively, but it can still be avoided for noninteractive renders - which is what this commit does.
Reviewed by: sergey
Differential Revision: https://developer.blender.org/D2285
The title says it all actually. From tests with barber shop scene here
gives 2-3x speedup for shader compilation on my oldie i7 machine. The
gain is mainly due to textures metadata query from jpeg files (which
seems to requite de-compression before metadata can be read). But in
theory could give nice improvements for scenes with huge node trees
as well (i'm talking about node trees of complexity of fractal which
we had reports about in the past).
Reviewers: juicyfruit, dingto, lukasstockner97, brecht
Reviewed By: brecht
Subscribers: monio, Blendify
Differential Revision: https://developer.blender.org/D2215
Bump mapping was happening in world space while displacement happens in object
space, causing shading errors when displacement type was used with bump mapping.
To fix this the proper transforms are added to bump nodes. This is only done
for automatic bump mapping however, to avoid visual changes from other uses of
bump mapping. It would be nice to do this for all bump mapping to be consistent
but that will have to wait till we can break compatibility.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2191
The two SVM nodes added with e7ea1ae78c caused a slowdown on AMD cards when rendering with OpenCL, whether displacement was used or not.
In the Barcelona Pavillon scene on a RX480, this would cause a 12% slowdown.
Therefore, this commit adds a additional flag for feature-adaptive compilation so that the new SVM nodes are only enabled when they are needed (Node tree connected to the Displacement output and Displacement type set to Both).
Also, the nodes were also added to shaders when the Displacement Type was set to Bump (the default), which was unneccessary and is fixed now.
Thanks to linda2 on IRC for reporting and testing and to maiself for help with the displacement shader code.
This fix might be relevant for 2.78, but it should be tested further before including it.
Object coordinates can now be used in the displacement shader and will give
correct results, where as before bump mapping was calculated from the displace
positions and resulted in incorrect shading.
This works by evaluating the shader in two parts, first bump then surface, and
setting the shader state to match what it would be if the surface was
undisplaced for the bump shader evaluation. Currently only `P` is set as if
undisplaced, but other shader variables could be set as well, such as `I` or
`time`. Since these aren't set to anything meaningful for displacement I left
them out of this patch, we can decide what to do with them separately.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2156
Storing multiple copies of a shader was needed when the displacement method was
a mesh option and could be different for each mesh. Now that its a shader option
this is unnecessary.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2156
Mainly makes logging less verbose when doing progressive sampling in viewport.
Such kind of verbosity is not really possible to be filtered out with `grep`
so let's reshuffle few lines of code.
When World MIS is enabled by the user, we now check if we actually need it.
In case of a simple node setup (no procedurals, no HDRs..) we auto disable MIS internally to save render time.
This change is important for upcoming default changes.
This gives about 2x speedup (3.2sec vs. 11.9sec with 32716 handled nodes) when
updating shader for the shader tree.
Reviewers: brecht, juicyfruit, dingto, lukasstockner97
Differential Revision: https://developer.blender.org/D1700
