The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
We started to run out of bits there, so now we separate flags
which came from __object_flags and which are either runtime or
coming from __shader_flags.
Rule now is: SD_OBJECT_* flags are to be tested against new
object_flags field of ShaderData, all the rest flags are to
be tested against flags field of ShaderData.
There should be no user-visible changes, and time difference
should be minimal. In fact, from tests here can only see hardly
measurable difference and sometimes the new code is somewhat
faster (all within a noise floor, so hard to tell for sure).
Reviewers: brecht, dingto, juicyfruit, lukasstockner97, maiself
Differential Revision: https://developer.blender.org/D2428
Was a bit confusing to have transparent and translucent depth
exposed but no diffuse or glossy.
Reviewers: brecht
Subscribers: eyecandy
Differential Revision: https://developer.blender.org/D2399
When using the Normal output of the Texture Coordinate node on Point and Spot lamps, the coordinates now depend on the rotation of the lamp.
On Area lamps, the Parametric output of the Geometry node now returns UV coordinates on the area lamp.
Credit for the Area lamp part goes to Stefan Werner (from D1995).
Mostly this is making inlining match CUDA 7.5 in a few performance critical
places. The end result is that performance is now better than before, possibly
due to less register spilling or other CUDA 8.0 compiler improvements.
On benchmarks scenes, there are 3% to 35% render time reductions. Stack memory
usage is reduced a little too.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D2269
Object coordinates can now be used in the displacement shader and will give
correct results, where as before bump mapping was calculated from the displace
positions and resulted in incorrect shading.
This works by evaluating the shader in two parts, first bump then surface, and
setting the shader state to match what it would be if the surface was
undisplaced for the bump shader evaluation. Currently only `P` is set as if
undisplaced, but other shader variables could be set as well, such as `I` or
`time`. Since these aren't set to anything meaningful for displacement I left
them out of this patch, we can decide what to do with them separately.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2156
Adds a descriptor for attributes that can easily be passed around and extended
to contain more data. Will be used for attributes on subdivision meshes.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2110
This adds support for ngons and attributes on subdivision meshes. Ngons are
needed for proper attribute interpolation as well as correct Catmull-Clark
subdivision. Several changes are made to achieve this:
- new primitive `SubdFace` added to `Mesh`
- 3 more textures are used to store info on patches from subd meshes
- Blender export uses loop interface instead of tessface for subd meshes
- `Attribute` class is updated with a simplified way to pass primitive counts
around and to support ngons.
- extra points for ngons are generated for O(1) attribute interpolation
- curves are temporally disabled on subd meshes to avoid various bugs with
implementation
- old unneeded code is removed from `subd/`
- various fixes and improvements
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2108
BVH traversal is not really that much a geometry and we've got
quite some traversals now. Makes sense to keep them separate in
the name of source structure clarity.
This commit adds a new distribution to the Glossy, Anisotropic and Glass BSDFs that implements the
multiple-scattering microfacet model described in the paper "Multiple-Scattering Microfacet BSDFs with the Smith Model".
Essentially, the improvement is that unlike classical GGX, which only models single scattering and assumes
the contribution of multiple bounces to be zero, this new model performs a random walk on the microsurface until
the ray leaves it again, which ensures perfect energy conservation.
In practise, this means that the "darkening problem" - GGX materials becoming darker with increasing
roughness - is solved in a physically correct and efficient way.
The downside of this model is that it has no (known) analytic expression for evalation. However, it can be
evaluated stochastically, and although the correct PDF isn't known either, the properties of MIS and the
balance heuristic guarantee an unbiased result at the cost of slightly higher noise.
Reviewers: dingto, #cycles, brecht
Reviewed By: dingto, #cycles, brecht
Subscribers: bliblubli, ace_dragon, gregzaal, brecht, harvester, dingto, marcog, swerner, jtheninja, Blendify, nutel
Differential Revision: https://developer.blender.org/D2002
Compile time per kernel increased alot after recent image commits, re-shuffle some code to fix this.
Patch by "LazyDodo".
Differential Revision: https://developer.blender.org/D2012
While previous code was already compiling with OSL 1.6 it was using some symbols
which were considered deprecated in upstream.
This commit adds some ifdefs, but soon we'll get rid of all them rather soon
with the upcoming OIIO/OSL update.
This commit changes the way how we pass bounce information to the Light
Path node. Instead of manualy copying the bounces into ShaderData, we now
directly pass PathState. This reduces the arguments that we need to pass
around and also makes it easier to extend the feature.
This commit also exposes the Transmission Bounce Depth to the Light Path
node. It works similar to the Transparent Depth Output: Replace a
Transmission lightpath after X bounces with another shader, e.g a Diffuse
one. This can be used to avoid black surfaces, due to low amount of max
bounces.
Reviewed by Sergey and Brecht, thanks for some hlp with this.
I tested compilation and usage on CPU (SVM and OSL), CUDA, OpenCL Split
and Mega kernel. Hopefully this covers all devices. :)
While SCons building system was serving us really good for ages it's no longer
having much attention by the developers and started to become quite a difficult
task to maintain.
What's even worse -- there started to be quite serious divergence between SCons
and CMake which was only accumulating over the releases now. The fact that none
of the active developers are really using SCons and that our main studio is also
using CMake spotting bugs in the SCons builds became quite a difficult task and
we aren't always spotting them in time.
Meanwhile CMake became really mature building system which is available on every
platform we support and arguably it's also easier and more robust to use.
This commit includes:
- Removal of actual SCons building system
- Removal of SCons git submodule
- Removal of documentation which is stored in the sources and covers SCons
- Tweaks to the buildbot master to stop using SCons submodule
(this change requires deploying to the server)
- Tweaks to the install dependencies script to skip installing or mentioning
SCons building system
- Tweaks to various helper scripts to avoid mention of SCons folders/files
as well
Reviewers: mont29, dingto, dfelinto, lukastoenne, lukasstockner97, brecht, Severin, merwin, aligorith, psy-fi, campbellbarton, juicyfruit
Reviewed By: campbellbarton, juicyfruit
Differential Revision: https://developer.blender.org/D1680
Issue was caused by changed function signature. This is still not really full
support of new OSL API since we don't store anything in the derivatives which
could confuse mipmapping.
So now the following OSL versions are supported (at least for compilation):
- 1.5 with closure alignment patch applied
- 1.6.8 release
- 1.7 development version from latest git
This isn't really complete fix, complete fix would require calculating
derivatives via OIIO API, but supporting this will either end up with
some code duplication or will require some non really safe changes at
this release cycle.
This header was already included into some of the implementation files already,
and this change is needed for some upcoming changes in the way how kernel_types.h
works.
Originally we thought it's needed in order to distinguish builtin file from
filename which starts with '@', but the filepath is actually full path there
and it's unlikely to have file system where '@' is a proper root character.
Surprisingly this does not give visible speed differences, but it's still
nice to get rid of redundant check.
This inconsistency drove me totally crazy, it's really confusing
when it's inconsistent especially when you work on both Cycles and
Blender sides.
Shouldn;t cause merge PITA, it's whitespace changes only, Git should
be able to merge it nicely.
Issue was introduced in 01ee21f where i didn't notice *_setup()
function only doing partial initialization, and some of parameters
are expected to be initialized by callee function.
This was hitting only some setups, so tests with benchmark scenes
didn't unleash issues. Now it should all be fine.
This is to go to the 2.74 branch and we actually might re-AHOY.
