The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
Pass globals as a bare pointer, same as it sued to be prior to split kernel rework.
AMD CPU platform and Intel OpenCL were complaining about this.
Perhaps we shouldn't pass globals as pointer at all, this isn't something what is
really portable and can cause issues on 32 bit perhaps.
Reduces memory allocation for split kernel.
This allows for faster rendering due to bigger global size,
specially when GPU memory is limited.
Perfromance results:
R9 290 total render time
Before After Change
BMW 4:37 4:34 -1.1 %
Classroom 14:43 14:30 -1.5 %
Fishy Cat 11:20 11:04 -2.4 %
Koro 12:11 12:04 -1.0 %
Pabellon Barcelona 22:01 20:44 -5.8 %
Pabellon Barcelona(*) 15:32 15:09 -2.5 %
(*) without glossy connected to volume
Decoupled ray marching is not supported yet.
Transparent shadows are always enabled for volume rendering.
Changes in kernel/bvh and kernel/geom are from Sergey.
This simiplifies code significantly, and prepares it for
record-all transparent shadow function in split kernel.
By calculating the size of the state buffer in the kernel rather than the host
less code is needed and the size actually reflects the requested features.
Will also be a little faster in some cases because of larger global work size.
This was only needed for the previous implementation of parallel samples. As
we don't have that any more it can be removed.
Real reason for removal tho is this: `per_sample_output_buffers` was being
calculated too small and artifacts resulted. The tile buffer is already
the correct size and calculating the size for `per_sample_output_buffers`
is a bit difficult with the current layout of the code. As
`per_sample_output_buffers` was only needed for `sum_all_radiance`,
removing that kernel and writing output to the tile buffer directly
fixes the artifacts.
This does a few things at once:
- Refactors host side split kernel logic into a new device
agnostic class `DeviceSplitKernel`.
- Removes tile splitting, a new work pool implementation takes its place and
allows as many threads as will fit in memory regardless of tile size, which
can give performance gains.
- Refactors split state buffers into one buffer, as well as reduces the
number of arguments passed to kernels. Means there's less code to deal
with overall.
- Moves kernel logic out of OpenCL kernel files so they can later be used by
other device types.
- Replaced OpenCL specific APIs with new generic versions
- Tiles can now be seen updating during rendering
Seems CUDA failed to de-duplicate the array across multiple inlined
versions of the shadow_blocked(). Helped it a bit with that now.
Gives about 100MB memory improvement on a scenes after previous
commit and brings up memory "regression" to only 100MB comparing to
the master branch now.
Note that volume rendering is not supported yet, this is a step towards that.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2299
Now we have the 4 component ones first (float4, byte4, half4) followed by the 1 component ones (float, byte, half).
Makes code a bit more consistent and also reduces code a bit when enabling half support on GPU in next commit.
This also exposed a typo in half CPU images for 3D textures, which wasn't used yet, but good to have that one fixed anyway.
BVH traversal is not really that much a geometry and we've got
quite some traversals now. Makes sense to keep them separate in
the name of source structure clarity.
For non-branched path tracing with a GTX 960 and CUDA 7.5, this gives a small reduction
in stack usage but mainly: 8% faster render on BMW, 5% on pabellon, 13% on classroom.
This is an initial commit for half texture support in Cycles.
It adds the basic infrastructure inside of the ImageManager and support for these textures on CPU.
Supported:
* Half Float OpenEXR images (can be used for e.g HDRs or Normalmaps) now use 1/2 the memory, when loaded via disk (OIIO).
ToDo:
Various things like support for inbuilt half textures, GPU... will come later, step by step.
Part of my GSoC 2016.
Compile time per kernel increased alot after recent image commits, re-shuffle some code to fix this.
Patch by "LazyDodo".
Differential Revision: https://developer.blender.org/D2012
This way, we also save 3/4th of memory for single channel byte textures (e.g. Bump Maps).
Note: In order for this to work, the texture *must* have 1 channel only.
In Gimp you can e.g. do that via the menu: Image -> Mode -> Grayscale
Until now, single channel textures were packed into a float4, wasting 3 floats per pixel. Memory usage of such textures is now reduced by 3/4.
Voxel Attributes such as density, flame and heat benefit from this, but also Bumpmaps with one channel.
This commit also includes some cleanup and code deduplication for image loading.
Example Smoke render from Cosmos Laundromat: http://www.pasteall.org/pic/show.php?id=102972
Memory here went down from ~600MB to ~300MB.
Reviewers: #cycles, brecht
Differential Revision: https://developer.blender.org/D1981
* When Baking wasn't used we got an error.
* On top of Volume Nodes (NODES_FEATURE_VOLUME), we now also check if we need volume sampling code,
so we can disable that as well and save some further compilation time.
This seems quite useful for the development, so you don't need to wait
all the kernels to be re-compiled when working on a new feature, which
speeds up re-iteration.
Marked as an advanced option, so if it doesn't work so well in practice
it's safe to revert anyway.
The idea is to switch from allocating separate buffers for shader data's
structure of arrays to allocating one huge memory block and do some index
trickery to make it accessed as SOA.
This saves quite reasonable amount of lines of code in device_opencl and
also makes it possible to get rid of special declaration of ShaderData
structure.
As a side effect it also makes it easier to experiment with SOA vs. AOS
for split kernel.
Works fine here on NVidia GTX580, Intel CPU amd AMD Fiji cards.
Reviewers: #cycles, brecht, juicyfruit, dingto
Differential Revision: https://developer.blender.org/D1593
It was mainly unfinished code for volume in a split kernel which
should be done differently anyway to avoid such a code copy-paste.
The code didn't really work, so likely nobody will cry.
Use KernelGlobals to access all the global arrays for the intermediate
storage instead of passing all this storage things explicitly.
Tested here with Intel OpenCL, NVIDIA GTX580 and AMD Fiji, didn't see
any artifacts, so guess it's all good.
Reviewers: juicyfruit, dingto, lukasstockner97
Differential Revision: https://developer.blender.org/D1736
The combined pass is built with the contributions the user finds fit.
It is useful for lightmap baking, as well as non-view dependent effects
baking.
The manual will be updated once we get closer to the 2.77 release.
Meanwhile the new page can be found here:
http://dalaifelinto.com/blender-manual/render/cycles/baking.html
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D1674
This commit changes the way how we pass bounce information to the Light
Path node. Instead of manualy copying the bounces into ShaderData, we now
directly pass PathState. This reduces the arguments that we need to pass
around and also makes it easier to extend the feature.
This commit also exposes the Transmission Bounce Depth to the Light Path
node. It works similar to the Transparent Depth Output: Replace a
Transmission lightpath after X bounces with another shader, e.g a Diffuse
one. This can be used to avoid black surfaces, due to low amount of max
bounces.
Reviewed by Sergey and Brecht, thanks for some hlp with this.
I tested compilation and usage on CPU (SVM and OSL), CUDA, OpenCL Split
and Mega kernel. Hopefully this covers all devices. :)
While SCons building system was serving us really good for ages it's no longer
having much attention by the developers and started to become quite a difficult
task to maintain.
What's even worse -- there started to be quite serious divergence between SCons
and CMake which was only accumulating over the releases now. The fact that none
of the active developers are really using SCons and that our main studio is also
using CMake spotting bugs in the SCons builds became quite a difficult task and
we aren't always spotting them in time.
Meanwhile CMake became really mature building system which is available on every
platform we support and arguably it's also easier and more robust to use.
This commit includes:
- Removal of actual SCons building system
- Removal of SCons git submodule
- Removal of documentation which is stored in the sources and covers SCons
- Tweaks to the buildbot master to stop using SCons submodule
(this change requires deploying to the server)
- Tweaks to the install dependencies script to skip installing or mentioning
SCons building system
- Tweaks to various helper scripts to avoid mention of SCons folders/files
as well
Reviewers: mont29, dingto, dfelinto, lukastoenne, lukasstockner97, brecht, Severin, merwin, aligorith, psy-fi, campbellbarton, juicyfruit
Reviewed By: campbellbarton, juicyfruit
Differential Revision: https://developer.blender.org/D1680
This makes it possible to move some parts of evaluation from host to the device
and hopefully reduce memory usage by avoid having full RGBA buffer on the host.
Reviewers: juicyfruit, lukasstockner97, brecht
Reviewed By: lukasstockner97, brecht
Differential Revision: https://developer.blender.org/D1702
Main goal is to make kernel signatures editing easier and less prone to the
errors caused by missing function signature update or so.
This will also make it easier to add new CPU architectures.
Reviewers: juicyfruit, dingto, lukasstockner97, brecht
Reviewed By: dingto, lukasstockner97, brecht
Differential Revision: https://developer.blender.org/D1703
